Mastery UST Schusskopf | Zweihand

SKU
4500
Disponibile
Disponibilità immediata, tempo di consegna 1-3 giorni lavorativi
79,90 €°
-
+
Anteprima

Ultimate Scandi Taper. How about shooting heads that will change your spey casting for good. With 12 different densities in single, double and triple densities from floating to 850 grain sinking lines. Combine these UST heads with our brand new coated Ultimate Shooting Line or the super slick mono Ultimate Running Line and you are set to go.
Pulling up a heavy sinking line has never been easier.

The first ever Scandi shooting heads for migratory fish like Salmon, Seatrout and Steelhead with a textured coating. The UST shooting heads have been designed and developed for the underhand or Scandi style of Speycasting . The advanced tapers and densities help load your rod and make angled casts easily so you cast with minimal effort and fish your fly at the correct depth and speed. The UST heads will easily form tight flat loops and reach those far off lies with a strong delivery yet give excellent control and gentle presentation when needed.
These textured tapers will give incredible stability when casting with added feel and control when fishing giving overall unequalled performance.

Available lineclass: 7/8, 8/9, 9/10, and 10/11.

In 12 different densities, from Float till Sink1/Sink3/Sink5 and 850 Express

UST Float
Mastery UST Floating, wether you are swinging, riffling or hitching your fly. This is the line for fishing on or near the surface. Visual takes will never go out of fashion!

UST DD H/I - Double Density
These lines are perfect for slowing down the fly drift in strong currents or if you just want to fish deep and slow. The four different double density lines will get your fly to the correct depth.
This is the must have and one of the most versatile lines for any angler chasing silver! If stealth is required this line gives it. Perfectly balanced so it will stay just below the water surface.

UST DD S1/S2 - Double Density
These lines are perfect for slowing down the fly drift in strong currents or if you just want to fish deep and slow. The four different double density lines will get your fly to the correct depth.
UST Double Density S1/S2 head Fishes relatively close to the surface. Good for shallower pools with fast currents where you need to slow down the swing. Also an excellent choice after a summer flood when you need to go a little deeper.

UST DD S2/S3 - Double Density
These lines are perfect for slowing down the fly drift in strong currents or if you just want to fish deep and slow. The four different double density lines will get your fly to the correct depth.
UST Double Density S2/S3 head is probably the most all round sinking line through the entire season. A great fish catcher in all temperatures and levels.

UST DD S3/S4 - Double Density
These lines are perfect for slowing down the fly drift in strong currents or if you just want to fish deep and slow. The four different double density lines will get your fly to the correct depth.
UST Double Density S3/S4 is for the deep pools, low water temperatures or on high water levels with strong currents where the fly needs to get down deep and fast.

UST TTD F/H/I - True Triple Density
This head gives higher speed but brings the fly just below the surface. Fly speed is easily controlled by mending the floating part of the line up or downstream.

UST TTD F/I/S2 - True Triple Density
We have designed these lines to maintain the fly speed to get the flies down to the required depth. The lower densities in the rear of the taper help keep up the speed and the higher densities in the front help get the fly down to the fish. An excellent choice in pools where the main current is close to the opposite bank.
UST True Triple Density F/I/S2 Head has the same qualities as the Float/Hover/Intermediate but brings the fly down a little deeper. This line became a firm favorite among our field testers.

UST TTD F/H/S3 - True Triple Density
We have designed these lines to maintain the fly speed to get the flies down to the required depth. The lower densities in the rear of the taper help keep up the speed and the higher densities in the front help get the fly down to the fish. An excellent choice in pools where the main current is close to the opposite bank.
The UST True Triple Density F/H/S3 is similar qualities as Floating/INT/Sink2 but gets the fly down deep. A great choice for when fish are lying in deeper water and where fly speed is the key.

UST TTD I/S2/S4 - True Triple Density
We have designed these lines to maintain the fly speed to get the flies down to the required depth. The lower densities in the rear of the taper help keep up the speed and the higher densities in the front help get the fly down to the fish. An excellent choice in pools where the main current is close to the opposite bank.
This line cuts straight through the surface but the intermediate section helps keep the fly speed up while the Sink4 section brings the fly down to where the fish are lying.With the Intermediate section below the surface there will be less influences by the current giving excellent contact with the fly. This is a favorite line of the field testers in pools of medium depth and current.

UST TTD S1/S3/S5 - True Triple Density
We have designed these lines to maintain the fly speed to get the flies down to the required depth. The lower densities in the rear of the taper help keep up the speed and the higher densities in the front help get the fly down to the fish. An excellent choice in pools where the main current is close to the opposite bank.
The UST S1/S3/S5 head incorporates similar characteristics as the Intermediate/Sink2/Sink4 but works deeper. This line excels in heavy currents and when the fish are holding in deeper pools. Casts like a bullet ! One of the lines which caught the most fish during field testing.

UST SD S5 - Single Density Sinking
These single density lines are for the fastest water and the deepest pools. The one objective of these lines is to get the fly down deep quickly! The new UST taper and the textured surface make these sinking lines much easier to handle especially when bringing to the surface before casting.
This S5 shooting head is specially designed to balance 9/10 and 10/11 weight rods. These are the lines to choose for high cold water or summer floods. The Sink5 slows down the speed and gets the fly down deep and in front of the fish.

UST 750 EXPRESS - Single Density Sinking
These single density lines are for the fastest water and the deepest pools. The one objective of these lines is to get the fly down deep quickly! The new UST taper and the textured surface make these sinking lines much easier to handle especially when bringing to the surface before casting.
UST EXPRESS 750 Grain heads has the same density as the Sink 5 just heavier which makes them get down even deeper. The taper design enables these lines to fish deeper than other grain rated lines on the market.

UST 850 EXPRESS - Single Density Sinking
These single density lines are for the fastest water and the deepest pools. The one objective of these lines is to get the fly down deep quickly! The new UST taper and the textured surface make these sinking lines much easier to handle especially when bringing to the surface before casting.
UST EXPRESS 850 Grain heads has the same density as the EXPRESS 750 just heavier which makes them get down even deeper. The taper design enables these lines to fish deeper than other grain rated lines on the market.

UST Float

          

UST DD Hover/Intermediate

 

 

 

Line Class
     
Head Weight
     
Head Length
     
Sink Rate
    
Line Class
     
Head Weight
     
Head Length
    
Sink Rate
7/8 DH   30 gr / 460 grain   11,2 m    
  7/8 DH
  30 gr / 460 grain   11,2 m   33 sec/m
8/9 DH
  34 gr / 520 grain
  11,6 m  
  8/9 DH   34 gr / 520 grain
  11,6 m
  33 sec/m
9/10 DH   38 gr / 590 grain   12,2 m       9/10 DH   38 gr / 590 grain

12,2 m
  33 sec/m
10/11 DH   42 gr / 650 grain
  12,8 m  
  10/11 DH   42 gr / 650 grain
  12,8 m
  33 sec/m

UST DD Sink1/Sink2

          

UST DD Sink2/Sink3

 

Line Class
     
Weight
     
Length uncut
     
Sink Rate
    
Line Class
     
Weight
     
Length uncut
    
Sink Rate
7/8 DH   30 gr / 460 grain   11,2 m   13 sec/m    7/8 DH   30 gr / 460 grain

11,2 m
  10 sec/m
8/9 DH   34 gr / 520 grain 
  11,6 m
  13 sec/m
  8/9 DH
  34 gr / 520 grain
  11,6 m
  10 sec/m
9/10 DH   38 gr / 590 grain
  12,2 m
  13  sec/m
  9/10 DH
  38 gr / 590 grain
  12,2 m 
  10 sec/m
10/11 DH   44 gr / 650 grain
  12,8 m   13 sec/m   10/11 DH   44 gr / 650 grain
  12,8 m
  10 sec/m

UST DD Sink3/Sink4

          

UST TTD Float/Hover/Intermediate

 

Line Class
     
Weight
     
Length uncut
     
Sink Rate
    
Line Class
     
Weight
     
Length uncut
    
Sink Rate
7/8 DH
  30 gr / 460 grain
  11,2 m   8 sec/m   7/8 DH   30 gr / 460 grain
  11,2 m
  30 sec/m
8/9 DH   34 gr / 520 grain
  11,6 m   8 sec/m    8/9 DH   34 gr / 520 grain

11,6 m
  30 sec/m
9/10 DH   38 gr / 590 grain
  12,2 m   8 sec/m   9/10 DH   38 gr / 590 grain
  12,2 m
  30 sec/m
10/11 DH   42 gr / 650 grain   12,8 m   8 sec/m   10/11 DH   42 gr / 650 grain    12,8 m   30 sec/m

UST TTD Float/Intermediate/Sink2

          

UST TTD Float/Hover/Sink3

 

Line Class
     
Weight
     
Length uncut
     
Sink Rate
    
Line Class
     
Weight
     
Length uncut
    
Sink Rate
7/8 DH
  30 gr / 460 grain
  11,2 m   13 sec/m   7/8 DH   30 gr / 460 grain
  11,2 m
  10 sec/m
8/9 DH   34 gr / 520 grain   11,6 m   13 sec/m    8/9 DH   34 gr / 520 grain

11,6 m
  10 sec/m
9/10 DH   38 gr / 590 grain
  12,2 m   13 sec/m   9/10 DH   38 gr / 590 grain
  12,2 m
  10 sec/m
10/11 DH   42 gr / 650 grain   12,8 m   13 sec/m   10/11 DH   42 gr / 650 grain    12,8 m   10 sec/m

UST TTD Intermediate/Sink2/Sink4

          

UST TTD Sink1/Sink3/Sink5

   

Line Class
     
Weight
     
Length uncut
     
Sink Rate
    
Line Class
     
Weight
     
Length uncut
    
Sink Rate
7/8 DH
  30 gr / 460 grain
  11,2 m   8 sec/m   7/8 DH   30 gr / 460 grain
  11,2 m
  6,5 sec/m
8/9 DH   34 gr / 520 grain   11,6 m   8 sec/m    8/9 DH   34 gr / 520 grain

11,6 m
  6,5 sec/m
9/10 DH   36 gr / 590 grain
  12,2 m   8 sec/m   9/10 DH   36 gr / 590 grain
  12,2 m
  6,5 sec/m
10/11 DH   42 gr / 650 grain   12,8 m   8 sec/m   10/11 DH   42 gr / 650 grain    12,8 m   6,5 sec/m

UST SD Sink5

          

UST 750 grain Express

   

 

Line Class
     
Head Weight
     
Head Length
     
Sink Rate
    
Line Class
     
Head Weight
     
Head Length
    
Sink Rate
#7/8 DH   30 gr / 460 grain   10,9 m
  6 sec/m
      49 gr / 750 grain   11,2 m   5 sec/m
#8/9 DH   34 gr / 520 grain   11,2 m
  6 sec/m
               
#9/10 DH   38 gr / 590 grain   11,5 m
  6 sec/m
               
#10/11 DH
  42 gr / 650 grain
  11,2 m   6 sec/m  
 
 
 

UST 850 grain Express

            

 

   
Line Class
     
Head Weight
     
Head Length
     
Sink Rate
                             

  55 gr / 850 grain
  11,2 m   4 sec/m  
 
 
 
Scrivi la tua recensione
Solo gli utenti registrati possono scrivere recensioni. Accedi o crea un account
Abbiamo trovato altri prodotti che ti potrebbero interessare!