Regal Tube Fly Head

Regal’s first-ever Tube Fly Head! This chuck-style vise head comes with 3 pins and is compatible with the Revolution and Medallion Series.

+ Chuck style tube vise with 3 pins
+ Utilizes head similar to all Regal heads for comfortable hand placement and easy tying
+ Head fits both Revolution and Medallion series vises
+ Chuck can directly hold pins and hard tubes
+ Chuck opens to hold up to 5/32 inch diameter (4mm diameter)
+ Vise / Head come with 3 pins:
- small – 1/32 inch diameter straight taped to 1/16 inch (.8 to 1.6mm)
- medium – 1/16 inch diameter straight taped to 3/32 inch (1.6 to 2.4mm)
- large – 3/32 inch diameter straight tapered to 1/8 inch (2.4 to 3.2mm)
+ Pins have a 2 ¾ inch section of uniform diameter that tapers to a larger end with flat sides to securely hold tubes
+ Pins can be cut to shorter lengths
+ Pins can be used in either direction
+ Slide tube onto pin then insert small end of pin into chuck and tighten thus pinching the tube between taper/flat end of the pin and chuck face
+ Grip flat large end in chuck and then slide tubes onto pin
+ Insert large end of pin into into head and tighten chuck on pin leaving a short section of pin exposed
+ Head is bored to allow more than 2 inches of the either end of pin to be inside the chuck and head

Made in USA